Elektronovinky.cz
    • Kit - electronic dice


Power supply: 6-12V
Current drain: 20-75mA
PCB dimensions: 48x63mm

An electronic variant of the common dice

      Electronic dice F-KH003

      4,44

      Kit - electronic dice Power supply: 6-12V Current drain: 20-75mA PCB dimensions: 48x63mm An electronic variant of the common dice

    • Five-layer classic big kit Merkur M8. Flagship of the MERKUR series. The big and the best one. It contains 135 kinds of parts - i.e. all types contained in the smaller kits, including caterpillar tracks, tractor wheels, toothed and gear wheels, motor, lon

      Construction set MERKUR M8

      130,33

      Five-layer classic big kit Merkur M8. Flagship of the MERKUR series. The big and the best one. It contains 135 kinds of parts - i.e. all types contained in the smaller kits, including caterpillar tracks, tractor wheels, toothed and gear wheels, motor, lon

    • Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: white

      Spray - marking paint MARKER PAINT - White - 500ml

      5,94

      Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: white

    • CRC Galvacolor - anti-corrosive paint protecting metals
against corrosion by means of zinc-phosphate pigments and
thanks the created physical barrier.

CRC Galvacolor - advantages:
• simple application - minimized preparation
• long-term protection against corrosion - better service life
• quick drying i.e. shorter shut-down
• aesthetic finish - satin appearance
• toluene free
• lead and chromate free
• protection due to created barrier and active pigments
• 2 in 1 - undercoat and zinc finish coat in only one layer
• single layer paint for medium corrosive environment
• yellow color - suitable for gas and liquid gas (except nitrogen and oxygen) piping
• spreading rate 3m2
• content 500ml

      Spray - anticorrosive coating GALVACOLOR RAL1004 - Yellow - 500ml

      5,94

      CRC Galvacolor - anti-corrosive paint protecting metals against corrosion by means of zinc-phosphate pigments and thanks the created physical barrier. CRC Galvacolor - advantages: • simple application - minimized preparation • long-term protection against corrosion - better service life • quick drying i.e. shorter shut-down • aesthetic finish - satin appearance • toluene free • lead and chromate free • protection due to created barrier and active pigments • 2 in 1 - undercoat and zinc finish coat in only one layer • single layer paint for medium corrosive environment • yellow color - suitable for gas and liquid gas (except nitrogen and oxygen) piping • spreading rate 3m2 • content 500ml

    • Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: fluorescent yellow

      Spray - marking paint MARKER PAINT - Structural Yellow - 500ml

      5,94

      Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: fluorescent yellow

    • Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: fluorescent magenta

      Spray - marking paint MARKER PAINT - Fluorescent Magenta - 500m

      5,94

      Special paint (spray tin) for marking and signalling. Holds on every surface and on every weather. Usable for many applications. The marking is not permanent, it will disappear after several weeks. Color: fluorescent magenta

    • Flying lampion, dimensions 40x100cm, made of rice paper, burner with solidified alcohol.
FLYING WISHES - WHAT IS IT?  

Flying wishes are small hot-air balloons. After firing the burner, the balloons will be filled with hot air and fly away into the sky. It consists of two parts: 
Balloon made of non-flammable rice or mulberry paper with bamboo frame, which bears small candle or burner. 

The materials used are environmental friendly. 

Flying time may be up to 20minutes, height 1km and the very long distance may be reached.  

Instruction manual 

1. Remove the balloon from its package - do not spread out! 

2. Write your wishes onto surface of balloon. 

3. Carefully spread out the balloon. 

4. Snap the ring of the balloon balloon and applying the all-round motion, fill the balloon with air. 

5. Fix the burner onto the wire hook and secure it well. Make sure that the burner cannot get free and fall down. 

6. Hold the tip and upper portion of the lampion in a sloping position away from your body. Top of the lampion should be directed slightly upwards. 

7. Light the burner. Be careful not to light the paper - beware the dropping alcohol! 

8. As soon as the burner is burning, hold the lampoon only at the top before your body. You can assist the spreading of lampion walls by your hand. 

9. As soon as the lampion starts ascend, snap its ring and hold few seconds so that it will ascend rapidly - in this way you can prevent from pertinent hitting the obstructions. 

Release the lampion and let it fly freely - do not tie it up! 

SAFETY PRECAUTIONS 

Before beginning with the unforgettable experience with launching of flying wishes balloons, carefully read and observe the following safety instructions! 

For your safety and safety of other persons, in addition to common valid safety precautions also the following safety rules must be observed: 

1. Before lighting the burner, make sure that the balloon is sufficiently filled with air and its distance from the flame is sufficient. 

There is a risk of fire in case of fire penetration. 

2. Since the unpacking until launching, it is recommended to handle with the balloon carefully, so that it cannot be destroyed. Only light the burner above  
the non-flammable surface (concrete etc.). Beware the dropping alcohol - danger of burning and fire. 

3. Never launch the balloon in proximity of combustibles or explosives and storege facilities for such material (petrol stations etc.). Do not launch the balloons  
near the inhabited locations, meadows, forests and transmission towers, places where the men and children are gathered, or if you are impaired. 
Otherwise the damaging of property and persons might occur. 

4. Do not launch the balloon at the wind speed greater than 5km/h. Also consider the wind direction - the calm or light wind 
is preferable. Even under such conditions, it  is necessary to launch the balloon in a open space, without danger of hit into surrounding objects (trees,  
buildings. etc.). 

5. The launching of flying wishes balloons is strictly prohibited in some exceptional cases and in some places near the airports and within controlled area (within radius at least 1km in case of regional airport  
and 50km for international airport). 

In case of launching of more than 50flying wishes at the same time

      Lampion of wishes

      1,08

      Flying lampion, dimensions 40x100cm, made of rice paper, burner with solidified alcohol. FLYING WISHES - WHAT IS IT? Flying wishes are small hot-air balloons. After firing the burner, the balloons will be filled with hot air and fly away into the sky. It consists of two parts: Balloon made of non-flammable rice or mulberry paper with bamboo frame, which bears small candle or burner. The materials used are environmental friendly. Flying time may be up to 20minutes, height 1km and the very long distance may be reached. Instruction manual 1. Remove the balloon from its package - do not spread out! 2. Write your wishes onto surface of balloon. 3. Carefully spread out the balloon. 4. Snap the ring of the balloon balloon and applying the all-round motion, fill the balloon with air. 5. Fix the burner onto the wire hook and secure it well. Make sure that the burner cannot get free and fall down. 6. Hold the tip and upper portion of the lampion in a sloping position away from your body. Top of the lampion should be directed slightly upwards. 7. Light the burner. Be careful not to light the paper - beware the dropping alcohol! 8. As soon as the burner is burning, hold the lampoon only at the top before your body. You can assist the spreading of lampion walls by your hand. 9. As soon as the lampion starts ascend, snap its ring and hold few seconds so that it will ascend rapidly - in this way you can prevent from pertinent hitting the obstructions. Release the lampion and let it fly freely - do not tie it up! SAFETY PRECAUTIONS Before beginning with the unforgettable experience with launching of flying wishes balloons, carefully read and observe the following safety instructions! For your safety and safety of other persons, in addition to common valid safety precautions also the following safety rules must be observed: 1. Before lighting the burner, make sure that the balloon is sufficiently filled with air and its distance from the flame is sufficient. There is a risk of fire in case of fire penetration. 2. Since the unpacking until launching, it is recommended to handle with the balloon carefully, so that it cannot be destroyed. Only light the burner above the non-flammable surface (concrete etc.). Beware the dropping alcohol - danger of burning and fire. 3. Never launch the balloon in proximity of combustibles or explosives and storege facilities for such material (petrol stations etc.). Do not launch the balloons near the inhabited locations, meadows, forests and transmission towers, places where the men and children are gathered, or if you are impaired. Otherwise the damaging of property and persons might occur. 4. Do not launch the balloon at the wind speed greater than 5km/h. Also consider the wind direction - the calm or light wind is preferable. Even under such conditions, it is necessary to launch the balloon in a open space, without danger of hit into surrounding objects (trees, buildings. etc.). 5. The launching of flying wishes balloons is strictly prohibited in some exceptional cases and in some places near the airports and within controlled area (within radius at least 1km in case of regional airport and 50km for international airport). In case of launching of more than 50flying wishes at the same time

    • PRO'SKIT Knife with breaking-off blade, grip made of zinc-alloy Ergonomic grip. Automatic insertion of new blade (magazine with 6 ones)

Material of edge: SK5

Total length of tool: 165mm

      Trimming knife PROSKIT DK-2112

      5,19

      PRO'SKIT Knife with breaking-off blade, grip made of zinc-alloy Ergonomic grip. Automatic insertion of new blade (magazine with 6 ones) Material of edge: SK5 Total length of tool: 165mm

    • Special paint (spray tin) for marking and signalling. Adhesive on every surface and every weather (independently of temperature and moisture). Usable for many applications.
Special composition provides for good visibility even under aggravated lighting conditions.
Water-based paint = neutral odour. May be used with spay tin in every position

      Spray - marking paint AQUA PAINT MARKER - Fluorescent Orange - 500ml

      5,94

      Special paint (spray tin) for marking and signalling. Adhesive on every surface and every weather (independently of temperature and moisture). Usable for many applications. Special composition provides for good visibility even under aggravated lighting conditions. Water-based paint = neutral odour. May be used with spay tin in every position

    • Universal lubricant, spray – CRC 5-56 300ml

Specifications:
– Anti-corrosion protection.
– Preservation od metal parts during storage.
– Metal and alloy protection.
– Can unclog metal parts jammed due to dirt, corrosion or grease.
– Quick penetration.
– Can make parts waterprooved.
– Is safe for all metal surfaces. Doesn't taint. 
– Is safe for most of the rubbers, plastics and covers. Test before use on sensitive materials
– 360° ventil enables use in different positions.
– Highly clean CO2 drive medium - up to 95% content of the active product.

Application:
– CRC 5-56 is modern and universal helper for hundreds of repairs in all operational conditions
– Electric components: connectors, switches, coils, contacts, cables, etc.
– Cars: ignotion system, cables, battery contacts, starters, antennae, chromed components, locks, ignition plugs, etc.
– Home: locks and hinges, drills, tools, scissors, toys, etc.
– Hobby: hunting equipment, bicycles, garden tools, in-line skates, skiing equipment, etc.
– Hundreds of other applications: workshop, garage, construction site, factories, offices, garden, home and more.

      Universal lubricant, spray 5-56 - 300ml

      3,70

      Universal lubricant, spray – CRC 5-56 300ml Specifications: – Anti-corrosion protection. – Preservation od metal parts during storage. – Metal and alloy protection. – Can unclog metal parts jammed due to dirt, corrosion or grease. – Quick penetration. – Can make parts waterprooved. – Is safe for all metal surfaces. Doesn't taint. – Is safe for most of the rubbers, plastics and covers. Test before use on sensitive materials – 360° ventil enables use in different positions. – Highly clean CO2 drive medium - up to 95% content of the active product. Application: – CRC 5-56 is modern and universal helper for hundreds of repairs in all operational conditions – Electric components: connectors, switches, coils, contacts, cables, etc. – Cars: ignotion system, cables, battery contacts, starters, antennae, chromed components, locks, ignition plugs, etc. – Home: locks and hinges, drills, tools, scissors, toys, etc. – Hobby: hunting equipment, bicycles, garden tools, in-line skates, skiing equipment, etc. – Hundreds of other applications: workshop, garage, construction site, factories, offices, garden, home and more.

    • Electronic kit Boffin 300 contains 60 components, all of which can build these projects: All projects from Boffin 100 and
lie detector
radio
pressure gauge
motion Detector
laser
and others, a total of 300 projects, which are described in detail in the manual.

      Electronic kit Boffin 300

      33,57

      Electronic kit Boffin 300 contains 60 components, all of which can build these projects: All projects from Boffin 100 and lie detector radio pressure gauge motion Detector laser and others, a total of 300 projects, which are described in detail in the manual.

    • Ultrasound distance meter with the ability of measuring of distance, surface and volume. This device also can measuce distance with the detection of wood, iron or electrical wiring in the walls.
Measure probes can be angle adjusted in the range of 0-90°.

Distance: 0,4 - 12m
Resolution: 0,01m

Wood Detection: 30x30mm, depth <15mm
Metal Detection : iron pipeif the 20mm diameter, depth < 26mm
El. wiring Detecion: up to 50mm for 90-250V

      Ultrasound distance meter and detector EM60

      22,37

      Ultrasound distance meter with the ability of measuring of distance, surface and volume. This device also can measuce distance with the detection of wood, iron or electrical wiring in the walls. Measure probes can be angle adjusted in the range of 0-90°. Distance: 0,4 - 12m Resolution: 0,01m Wood Detection: 30x30mm, depth <15mm Metal Detection : iron pipeif the 20mm diameter, depth < 26mm El. wiring Detecion: up to 50mm for 90-250V

    Mehr >>

    Neu und aktuell

    Newsletter-Archiv >>

    Newsletter-Versand per E-Mail

    Um Newsletter zu erhalten, geben Sie bitte Ihre E-Mail ein:
    Vertriebspartner

    There will be a big change in the total number of partner distribution points. Existing distribution points will be substituted by the service of our transportation partner PPL.
    This service is named PPL ParcelShop and it is the fastest growing network of distribution points in Czech Republic. This network is for all of those, who do not want to be limited by the time of delivery.
    You can visit PPL ParcelShop anytime when they are opened, including weekends.


    At PPL ParcelShops it is possible:

    • To pick up your packages
      • you can pick up your packages, which you ordered at e-shop
        • you can pay by cash on delivery

    Other advantages of PPL ParcelShop:
    • big network of branch stores uniformly distributed over Czech Republic
    • great accessibility of branch stores
    • fixed opening hours including weekends of most of the stores

    Es könnte Sie interessieren

    OWON
    INTERSIL
    VINNIC
    AIMTEC
    WINSTAR
    LEDWELL
    HANTEK
    NXP
    SERPAC